Good advice should never be expensive. Our overview provides answers to the most frequently asked questions about Homematic IP products and smart homes.
The Homematic IP Cloud runs exclusively on German servers. In addition, Homematic IP does not require you to enter any personal data. Technical device data is stored anonymously, making it impossible to draw any conclusions about the identity of the user or the behaviour of individual users.
Homematic IP is the first and only smart home system to have been certified by the VDE (Association for Electrical, Electronic & Information Technologies) for protocol, IT and data security – and several times at that. Homematic IP communication is cryptographically protected even during installation, and during operation all messages are encrypted and authenticated, making them as secure as online banking. For users, this means that all device data is protected against misuse by third parties in accordance with the highest security standards.
The CCU3 smart home central control unit offers a purely local solution without an internet connection. It provides extensive configuration options beyond those of the app itself, and all data is stored locally without an internet connection.
The Homematic IP system has no running costs. The app is also available as a free download for iOS and Android from the respective store.
As a wireless solution, Homematic IP is suitable for retrofitting flats and houses – whether owned or rented – as well as for new buildings. Homematic IP is particularly suitable for smart home beginners. However, it can also be used to extend existing Homematic solutions.
Homematic IP offers various options for setting up a smart home. It has the ideal solution for everyone, whether you choose the cloud solution or local data management, and whether you are a beginner or an expert.
The Homematic IP Access Point (HmIP-HAP) or the WLAN Access Point (HmIP-WLAN-HAP) serves as the gateway to the Homematic IP cloud, where system data is stored securely and completely anonymously. The Homematic IP smartphone app is available as an intuitive control element and can be downloaded free of charge from the Google Play Store for Android or the App Store for iOS. The combination of cloud and app makes setting up and operating the smart home particularly quick, simple and secure. Our cloud service not only enables the integration of Amazon Alexa and Google Assistant voice control, but also provides control of the system on the go – without additional costs or extensive configuration.
The CCU3 smart home central control unit offers extensive configuration options and the ability to flexibly combine all wireless and wired Homematic IP devices. It stores all data locally and runs your smart home without an internet connection. It is set up via the WebUI in a browser. Optional third-party solutions (mediola, EASY SmartHome) are available for remote control or using apps.
As the smart home market leader, we share the vision of a smart home in which all devices communicate seamlessly. That is why we welcome the development of Matter. We are following the process closely and evaluating it continuously.
Since its market launch in 2015, our Homematic IP smart home system has communicated using the IPv6 protocol – the protocol on which Matter is also based. We are pleased that other companies have now recognised the IP protocol as a forward-looking solution. However, several open questions still need to be clarified to achieve a truly connected smart home. The security and quality of our products and solutions are always our top priority. With Homematic IP, we and our customers are perfectly prepared for the path to a smart future.
Full integration into Apple HomeKit requires a special Apple-certified component that is not available in Homematic IP Access Points or the CCU3. Compromise solutions, such as integration at a purely local level, would cause significant functional limitations for the user and therefore do not meet our requirements for this type of connection.
For these reasons, we cannot currently offer Apple HomeKit integration. However, we take our customers' wishes very seriously and incorporate them into the further development of our products whenever possible.
Security-relevant software updates are provided for all Homematic IP products for at least five years from the start of sales. This measure complies with the requirements of the EU Cyber Resilience Act, which aims to ensure the cybersecurity of networked products.
The period stated applies to security updates. Functional improvements are not included.
In Homematic IP installations where both wired and wireless components are used, connecting wired wall thermostats (HmIPW-WTH/STH/STHD) to wireless underfloor heating controllers (HmIP-FALMOT-C12, HmIP-FAL24-C6/10, HmIP-FAL230-C6/10) increases the volume of wireless communication, so the duty cycle limit is reached quickly.
For the wired wall thermostats to reach the underfloor heating controllers, the information from these thermostats must be transferred from the Homematic IP wired bus to Homematic IP wireless communication. Depending on the system, this is done via the CCU3 central control unit or via the Homematic IP access point. The regular flow of information between the wall thermostats and the underfloor heating controllers means that the duty cycle limit is reached quickly.
When using a wired wall thermostat, we therefore recommend also using a wired underfloor heating controller. Conversely, it is not necessary to use a wireless wall thermostat with a wired underfloor heating controller.
Homematic IP is not only based on the IPv6 standard but is also an open system in which not only the software of the Linux-based CCU central control unit but also the REST API of the Homematic IP Cloud is publicly available. There are now several libraries and many software solutions in the community based on this interface.
The Homematic IP smartphone apps are also based exclusively on the REST API, which is optimised for interactive use. With regard to performance for all users and the quality of the Homematic IP Cloud, it is of course important to ensure “reasonable” use by everyone. In the past, for example, we noticed a high frequency of continuous “polling” via the REST API. There were also situations where “clumsily formulated” rules in a connected software solution continuously sent several requests per second.
Multi-level “throttling” has therefore been implemented in the Homematic IP Cloud, limiting the maximum number of requests at the TCP/IP level as well as at the application level. Requests may thus be temporarily blocked if the limits are exceeded. The limitation is automatic and does not need to be reset by eQ-3 support. If you are affected by throttling while using software, please contact the software manufacturer or programmer. The limits are set so that interactive use – for example with the Homematic IP smartphone apps – is not restricted.
Homematic IP Advanced Routing is a free update of the entire system and is already included in firmware version 3.53.26 of the CCU3. Version 2.2.18 is required for Homematic IP HmIP-HAP access points and version 2.2.16 for the HmIPW-DRAP. The new firmware will then be sent to the access points automatically.
The Homematic IP app version 2.4.0 (iOS) or 2.4.3 (Android) can be updated via the respective app store if automatic updates are not enabled.
The Homematic IP system is set up and controlled via the free Homematic IP smartphone app together with the Homematic IP cloud service.
Compared to other systems, Homematic IP actuators offer a significant advantage: thanks to built-in memory, cloud-independent functions such as heating schedules and time profiles, as well as communication between individual devices, work autonomously even without an active internet and cloud connection.
Cloud-dependent functions are all rules created with the “Automation” function, shutter configurations such as lockout protection, storm protection, heat protection or the ventilation function, and voice control integration. They are evaluated in the cloud and require an active internet and cloud connection at all times. We recommend linking Homematic IP devices, for example, using group functions such as light and shutter groups. This not only reduces wireless traffic, but the connections created by groups also remain functional without an internet connection.
When using voice commands such as Amazon Alexa or Google, we recommend using Homematic IP remote controls or buttons to control your devices so that the components can be switched even without active voice control.
Smart Home CCU3 central control unit:
In the Homematic IP system, the limit is 250 devices in conjunction with the CCU3 central control unit.
HmIP-HAP access point:
Up to 120 devices can be connected to one HmIP-HAP.
HmIPW-DRAP wired access point:
Up to 120 devices can be connected to the HmIPW-DRAP.
HmIP-WLAN-HAP WLAN access point:
Up to 40 devices can be connected to the HmIP-WLAN-HAP.
Homematic IP app:
The app is optimised for managing up to 20 rooms and 15 smartphones. An overview of the maximum number of rooms and devices in the system can also be found in the Homematic IP user manual.
Homematic IP wireless components have a range of approximately 200 to 300 metres in open space, which means they can generally communicate without interference over considerable distances inside buildings. However, if there are unfavourable structural conditions or less-than-ideal component placement, reception of individual components may not be optimal.
To optimise the radio range in such cases, Homematic IP essentially offers two options. You can find details on these topics in the user manual in the section “Range extension”.
Thanks to Advanced Routing, the radio range of the smart home system can be extended to suit buildings of practically any size. Concrete ceilings, basements or large properties are no longer a problem. To do this, several Homematic IP access points (HmIP-HAP) are simply connected via Ethernet, Powerline or a WLAN repeater with a LAN connection.
Alternatively, the following products also offer the option of extending the range, although using an additional HmIP-HAP is preferable.
The Homematic IP system is based on the same particularly powerful and robust wireless technology that has already proven itself in millions of Homematic, MAX! and RWE Smart Home (innogy) devices.
Some devices can communicate with each other directly. This means that links – for example between window contacts and radiator heads, or between wall thermostats and underfloor heating actuators – work even if the internet connection is interrupted. The Homematic IP cloud service automatically determines all the necessary connections between devices and then creates them independently.
Homematic IP always connects to Amazon Alexa or Google Home via the Homematic IP cloud. The cloud connection is established via the access point (HmIP-HAP or HmIPW-DRAP).
As a result, a connection between a Homematic IP device and a voice assistant is only possible via the access point.
To keep your Homematic IP devices up to date at all times, Homematic IP offers the option of updating the device software (firmware) of the components. The device software controls all functions of your Homematic IP device.
In general, Homematic IP devices use a background update. In this case the device firmware is updated in the background via the wireless connection. Some other devices are updated via a live update, which must be carried out directly in the Homematic IP app.
You can find more details in the user manual in the chapter “Updating devices”.
If you want to install version 3.53.30 (or higher) on your CCU3, please read the installation notes below and follow the instructions.
In general, the Homematic IP access point can be started without changing router settings. However, if it is used, for example, in a VLAN or a guest network with restricted options, it may be necessary to open certain ports for communication with the Homematic IP cloud.
If the access point cannot establish a connection to the Homematic IP cloud during start-up (indicated by the system button flashing blue), this may be due to individual router settings. Please also deactivate the energy-saving mode for the router port to which you have connected the Homematic IP Access Point.
For the Homematic IP system to run smoothly, the following TCP ports must be open:
If your firewall only allows data traffic to certain destinations, you should include the DNS names *.homematic.com and *.homematic-ip.com as permitted destinations.
If you still cannot establish a connection to the cloud, check whether you have blocked BitTorrent in your router's access profiles.
Pairing an additional access point (HmIP-HAP) or wired access point (HmIPW-DRAP) is as easy as adding any other device. After connecting the power supply of the (wired) access point and starting the “Add device” function in the main menu of the Homematic IP app, the new device automatically appears in the app. Then simply scan the QR code supplied with the device and it is ready to use.
You can find more details in the Advanced Routing guides.
The CCU3 offers extensive individual configuration options via the web interface, whereas the app is much simpler. Since the CCU3 is a purely local control of the Homematic IP smart home system and is not connected to the cloud, operation via the Homematic IP app is not possible.
The CCU3 comes with a free licence for our partner solution from mediola. You can use it to create your own personalised app based on a modular principle.
The Homematic IP app is currently available in Danish, Dutch, English, Finnish, French, German, Italian, Norwegian, Polish, Russian, Spanish and Swedish.
No, Homematic (not Homematic IP) devices are not supported in the Homematic IP app.
In Homematic IP installations where both wired and wireless components are used, connecting wired wall thermostats (HmIPW-WTH/STH/STHD) to wireless underfloor heating controllers (HmIP-FALMOT-C12, HmIP-FAL24-C6/10, HmIP-FAL230-C6/10) increases the volume of wireless communication, so the duty cycle limit is reached quickly.
When using a wired wall thermostat, we therefore recommend also using a wired underfloor heating controller. Conversely, it is not necessary to use a wireless wall thermostat with a wired underfloor heating controller.
If the radiator is installed in an unfavourable location (for example behind a curtain or cabinet), the temperature measured by the sensor may differ slightly from the room temperature. If the thermostat cannot compensate for the difference, a general adjustment must be made using the temperature offset. The temperature offset can be set individually for each thermostat in each room in a range of +/- 3.5 °C.
If, for example, 18 °C is measured in a room with a set temperature of 20 °C, an offset of -2.0 °C must be set. The factory setting is a temperature offset of 0.0 °C.
Applies to the following products:
Radiator thermostat – compact | Radiator thermostat – evo | Radiator thermostat – basic | Radiator thermostat – flex
Your Homematic IP climate solution offers five operating modes:
Applies to the following products:
Radiator thermostat – evo | Radiator thermostat – basic | Radiator thermostat – flex | Heating control set – basic | Radiator thermostat – pure
The valve protection function ensures that the actuators of radiator thermostats are regularly activated even during periods without temperature control, such as in summer, so that the valves do not seize. You can set the time interval (off, 1–28 days) and the activation time (0–10 minutes).
Applies to the following products: Radiator thermostat – evo | Radiator thermostat – basic | Radiator thermostat – flex
The window contact can be assigned to several areas in the Homematic IP access point or in the CCU3. So there is no need to fit several contacts on one window.
Linking Amazon Alexa or Google accounts to your Homematic IP smart home system lets you control many Homematic IP devices and functions with voice commands in combination with one or more compatible speakers with integrated voice assistance.
In addition, you can use smartphone apps such as Google Assistant to control your Homematic IP smart home system with voice commands – even without a Google Home speaker.
Among the many voice-controllable functions is control of shutters and blinds – with both Amazon Alexa and Google Home.
You can find a detailed overview of the control options in our user manual in the chapter “Voice control and other services”.
The Homematic IP shutter actuator (HmIP-BROLL) and blind actuator (HmIP-BBL) for brand-name switches have a measuring function that uses the load to detect whether the shutter is moving or has reached its end position. The measuring function assumes a minimum load of 5 W at the motor output at the start of movement. If this load is not reached, which is possible under certain conditions, the motor stops moving immediately.
When an isolating relay is used, we recommend deactivating the “automatic end position detection” option in the app under “Device overview”. Then carry out a manual calibration in the device configuration under “Travel times”.
If manual calibration was already carried out during setup, the measuring function is deactivated from the start.
In addition to standard service messages such as “Communication disrupted”, “Battery almost empty” and “Configuration data pending transfer”, other device-specific service messages may appear when using the Homematic IP keypad with the Smart Home CCU3 central control unit.
We will be happy to explain how these messages are processed and how to unlock the keypad – contact our support.
We found nothing for your query. Write to us and we'll be happy to help.
Whether you have a question about a product, something isn't working as you expected, you're looking for a specialist partner, or you simply want to give us feedback: we're always here to help.
We regularly hold Homematic IP workshops for partners and installation companies.
Training datesLooking for a good specialist in your area? We'll be happy to recommend a trained Homematic IP partner.
Find a specialistHave you bought a Homematic IP product and have questions about how it works? Our technical support team will be happy to help.
Contact supportBrowse the complete Homematic IP product catalogue – from heating, lighting and shading to security.
Product catalogue